Send Message
Contact Us

Contact Person : ling

Phone Number : +8618022350039

WhatsApp : +8618022350039

Free call

DSC17C Vehicle AC Compressor For Nissan X-Trail/Altima T31 2.5 92600JA00A

Minimum Order Quantity : 50pcs Price : Negotiable
Packaging Details : Neutral packing and our own brand packing or customized packing according to your requirement. Delivery Time : 30 days
Payment Terms : Western Union, L/C, T/T, MoneyGram, PayPal Supply Ability : 50000pcs per month
Place of Origin: Guangdong, China Brand Name: WNRLN
Model Number: WXNS109

Detail Information

Item No.: WXNS109 Car Make: For Nissan X-Trail/Altima T31 2.5
Voltage: 12V Size: Standard Size
Compressor Type: DSC17C OEM No.: 92600JA00A/92600JA000/92600ZN40B
High Light:

auto parts compressor

,

auto air compressor replacement

Product Description

DSC17C Vehicle AC Compressor For Nissan X-Trail/Altima T31 2.5 92600JA00A

 

 

 

 

Parameter:

Model Number WXNS109
Car Model For Nissan X-Trail/Altima T31 2.
Compressor model DSC17C
Type Air Conditioner Compressor
Year Model N/A
OE No.

92600JA00A/92600JA000/92600ZN40B

92600ZX50A/92600ET80A/92600ET81A/92600ET81B

Note If you need assistance to make sure that this part will fit your vehicle.Please send us the photo of your old product .The OEM and/or the year,make model and engine size of your vehicle so that we may confirm it for you.We also recommend using the compatibility chart in order to make sure that this product will fit your vehicle.

DSC17C Vehicle AC Compressor For Nissan X-Trail/Altima T31  2.5  92600JA00A 0DSC17C Vehicle AC Compressor For Nissan X-Trail/Altima T31  2.5  92600JA00A 1      

Compressors :

1) Rotary Vane - Panasonic

Rotary vane compressors consist of a rotor with three or four vanes and a carefully shaped

rotor housing. As the compressor shaft rotates, the vanes and housing form chambers.

The R134a is drawn through the suction port into these chambers, which become smaller as

the rotor turns. The discharge port is located at the point where the gas is fully compressed.

The vanes are sealed against the rotor housing by centrifugal force and lubricating oil. The

oil sump and oil pump are located on the discharge side, so that the high pressure forces oil

through the oil pump and then onto the base of the vanes keeping them sealed against the

rotor housing.

During idle an occasional vane noise from the compressor may be heard. This is due to the

time taken for lubricating oil to circulate through the A/C system.

2)Scroll type - Sanden

This compressor uses a unique design with two scrolls, one fixed and one is movable, both are inter-leaved.

The movable spiral is able to ORBIT or oscillate without actually fully rotating. The movable scroll is connected

to the input shaft via a concentric bearing.

As the movable spiral oscillates within the fixed spiral, a number of pockets are formed between the spiral. As

these pockets decrease in size the refrigerant is squeezed, the pressure increases and is discharged

through a reed valve at the discharge port in the rear section of the compressor.

3)Variable stroke - Harrison V5

The Delphi (Harrison) V5 compressor is a non-cycling variable displacement compressor.

The compressor varies displacement to control capacity to meet A/C system demand at all operating conditions. The compressor features a variable angle wobble plate in five (V5) cylinder axial piston design.

Displacement is controlled by a bellows actuated control valve located in the rear cylinder head. This control valve senses and responds to the system suction pressure or A/C system demand.

Through regulation of compressor crankcase pressure, the wobble plate angle, and therefore compressor displacement is variable.

In general, the compressor discharge pressure is much greater than the compressor crankcase. Which is greater than or equal to the compressor suction pressure.

At maximum displacement, compressor crankcase pressure is equal to the compressor suction pressure.

At reduced or minimum displacement, the compressor crankcase pressure is greater than the suction pressure.

Compressors and Mount & Drive:

Mount & Drive

Consists of a bracket to mount the compressor to the engine, a belt idler pulley, compressor

drive belt and possibly and extra drive pulley for the crankshaft.

Compressor Mount

Manufactured of either plate, cast iron, steel or aluminium, this bracket should exhibit

excellent noise absorption qualities especially if using a piston type compressor.

Idler Pulley

A small pulley normally used in conjunction with a belt adjusting mechanism, also used when

a belt has a long distance between pulleys to absorb belt vibrations.

Drive Pulley

Some vehicles do not have an extra pulley to accommodate an A/C drive belt, in these

cases an extra pulley is bolted onto the existing crankshaft pulley.

You Might Be Into These
Get in touch with us

Enter Your Message

sales011@gzweixing.com
+8618022350039
weixingauto
+8618022350039