CR14 Vehicle AC Compressor 73111FE040 For Subaru Impreza For Forester GC GF1.8 WXSB001

Product Description

CR14 Vehicle AC Compressor 73111FE040 For Subaru Impreza For Forester GC GF1.8 WXSB001

 
 
Parameter:

 
 
If your car air conditioning compressor is faulty and needs repair, you can consider the following steps:
 
1. Diagnosis: Firstly, get a professional diagnosis to confirm that the compressor is indeed the problem. This may involve testing the system, checking for leaks, and inspecting the compressor for any signs of damage.
 
2. Repair vs Replacement: Depending on the extent of the damage and the cost of repairs, you may need to decide whether to repair or replace the compressor. In some cases, it may be more cost-effective to replace the entire compressor unit.
 
3. Professional Assistance: Unless you have experience and knowledge in automotive air conditioning systems, it is advisable to seek professional assistance for the repair. An experienced technician will have the necessary tools and expertise to safely repair the compressor.
 
4. Compressor Repair: If the decision is to repair the compressor, the specific steps will depend on the nature of the damage. It may involve fixing leaks, replacing faulty components, or repairing internal mechanical issues.
 
5. Compressor Replacement: If the decision is to replace the compressor, the faulty one will need to be removed first. This involves evacuating the refrigerant, disconnecting electrical and mounting connections, and removing the compressor from the system. The new compressor can then be installed following the manufacturer's instructions.
 
6. Recharge the System: After repair or replacement, the air conditioning system will need to be recharged with the appropriate amount of refrigerant following the manufacturer's guidelines.
 
7. System Test: Once the repair or replacement is complete, it is important to thoroughly test the system to ensure the compressor is functioning properly and there are no leaks.
 
Again, it is recommended to consult the vehicle's service manual or seek professional assistance for specific instructions on repairing or replacing a car air conditioning compressor.
 
 
 
Test car air conditioning compressor
 
1. Start by visually inspecting the compressor for any signs of damage or leakage.
2. Measure the voltage at the compressor's electrical connector using a multimeter to ensure it is receiving power.
3. Check the clutch engagement by turning on the air conditioning and observing if the compressor clutch engages and spins freely.
4. Use a manifold gauge set to check the high and low side pressures. Compare the readings to the manufacturer's specifications to determine if the compressor is functioning properly.
5. If all other tests indicate a fault with the compressor, it may need to be removed and taken to a qualified professional for further testing and repair.
 
When it comes to installing a car air conditioning compressor, it is recommended to follow these steps:
 
1. Start by removing the refrigerant from the system using a refrigerant recovery machine.
2. Disconnect the electrical connector and any mounting brackets or bolts securing the compressor to the engine.
3. Remove the drive belt and any other components obstructing access to the compressor.
4. Replace the old compressor with the new one, ensuring the fittings are properly aligned and any gaskets or seals are in place.
5. Reinstall the mounting brackets, bolts, and electrical connector.
6. Reinstall any components that were removed to access the compressor.
7. Evacuate and recharge the system with the appropriate amount of refrigerant following the manufacturer's guidelines.
8. Test the system to ensure the compressor is functioning properly and there are no leaks.
 
Please note that it is recommended to consult the vehicle's service manual or seek professional assistance for specific instructions on testing and installing a car air conditioning compressor.
 

Goods Pictures 

Warehouse/Delivery