58171 57171 Car Air Conditioner Compressor For Hyundai H1 For StarexA1 For Terracan WXHY131

Product Description

58171 57171 Car Air Conditioner Compressor For Hyundai H1 For StarexA1 For Terracan WXHY131

Description

This compressor uses a unique design with two scrolls, one fixed and one is movable, both are inter-leaved. The movable spiral is able to ORBIT or oscillate without actually fully rotating. The movable scroll is connected to the input shaft via a concentric bearing. As the movable spiral oscillates within the fixed spiral, a number of pockets are formed between the spiral. Asthese pockets decrease in size the refrigerant is squeezed, the pressure increases and is discharged through a reed valve at the discharge port in the rear section of the compressor.

Specification:

When installing an automotive air conditioning compressor, it is not uncommon for there to be some level of noise. However, if the noise is excessive or unusual, it could indicate a problem with the compressor. Here are some steps to detect and repair compressor noise:

1. Visual Inspection: Start by visually inspecting the compressor for any obvious signs of damage, such as leaks, loose components, or worn-out belts. Check all the connecting lines and fittings as well.

2. Listening Test: Listen carefully to the noise produced by the compressor. Pay attention to the type of noise (grinding, squealing, rattling, etc.), the duration, and whether it occurs consistently or intermittently. This will help you identify the potential source of the problem.

3. Pressure Testing: Connect pressure gauges to the high and low-pressure sides of the air conditioning system. Start the engine and turn on the air conditioning. Monitor the pressure readings and compare them to the manufacturer's specifications. If the pressures are too high or too low, it could indicate a problem with the compressor.

4. Vibration Analysis: Excessive compressor noise can sometimes be caused by excessive vibration. Use a vibration analyzer to measure the level of vibration in the vicinity of the compressor. Excessive vibration can be caused by a misalignment of the compressor, worn-out motor mounts, or damaged internal components.

5. Lubrication Inspection: Check the compressor's lubricant level and quality. Low or contaminated lubricant can lead to increased friction and noise. If necessary, drain and replace the lubricant according to the manufacturer's recommendations.

6. Belt and Pulley Inspection: Examine the belt and pulley for any signs of wear, such as cracks, fraying, or misalignment. A loose or damaged belt can cause noise and affect the performance of the compressor. Replace or adjust the belt as needed.

7. Compressor Replacement: If all else fails and the noise persists, it may be necessary to replace the compressor. Consult with a professional technician who can help determine if a compressor replacement is needed.

Please note that these are general guidelines, and it is always recommended to consult with an automotive air conditioning specialist or a qualified technician for a proper diagnosis and repair of compressor noise.