AC Compressor Auto 07195223523B 263174 For Maserati Quattroporte WXAA006

AC Compressor Auto 07195223523B 263174 For Maserati Quattroporte WXAA006

Parameter:

The role of compressor

Compressor is an essential component of the air conditioning system in a vehicle. Its primary function is to circulate and compress the refrigerant gas, which is responsible for cooling and dehumidifying the air in the cabin. The process starts with the compressor drawing in low-pressure refrigerant gas from the evaporator and then compressing it into a high-pressure, high-temperature gas. This compressed gas is then sent to the condenser, where it releases heat and transforms into a high-pressure liquid. After leaving the condenser, the pressurized liquid refrigerant flows through the receiver drier or accumulator, which removes any moisture or debris from the refrigerant. From there, the refrigerant passes through the expansion valve or orifice tube, which regulates the flow of the refrigerant into the evaporator. Inside the evaporator, the high-pressure liquid refrigerant rapidly expands and evaporates, absorbing heat from the air passing over the evaporator's fins. This cools the air and reduces its humidity. The cooled air is then blown into the cabin through the vents, providing a comfortable and refreshing environment for passengers. Overall, the compressor plays a crucial role in the refrigeration cycle of the air conditioning system, ensuring that the refrigerant is properly circulated, pressurized, and transformed to achieve effective cooling inside the vehicle.

Compressor Pictures

WNRLN Packing

ß ß ßWNRLN packaging and shock-proof foams, which have protective functions.

Their thickness is thicker than ordinary box and foam , Relatively speaking, the quality of WNRLN packaging is better than that of ordinary packaging.

ß ß ß It has the advantages of good stiffness and high wear resistance.

It is deeply loved by domestic and foreign customers.

Test car air conditioning compressor

1. Start by visually inspecting the compressor for any signs of damage or leakage.

2. Measure the voltage at the compressor's electrical connector using a multimeter to ensure it is receiving power.

3. Check the clutch engagement by turning on the air conditioning and observing if the compressor clutch engages and spins freely.

4. Use a manifold gauge set to check the high and low side pressures. Compare the readings to the manufacturer's specifications to determine if the compressor is functioning properly.

5. If all other tests indicate a fault with the compressor, it may need to be removed and taken to a qualified professional for further testing and repair.

When it comes to installing a car air conditioning compressor, it is recommended to follow these steps:

1. Start by removing the refrigerant from the system using a refrigerant recovery machine.

2. Disconnect the electrical connector and any mounting brackets or bolts securing the compressor to the engine.

3. Remove the drive belt and any other components obstructing access to the compressor.

4. Replace the old compressor with the new one, ensuring the fittings are properly aligned and any gaskets or seals are in place.

5. Reinstall the mounting brackets, bolts, and electrical connector.

6. Reinstall any components that were removed to access the compressor.

7. Evacuate and recharge the system with the appropriate amount of refrigerant following the manufacturer's guidelines.

8. Test the system to ensure the compressor is functioning properly and there are no leaks.

Please note that it is recommended to consult the vehicle's service manual or seek professional assistance for specific instructions on testing and installing a car air conditioning compressor.