Auto AC System Part Compressor For Isuzu Aska For Mixer For Blender WXIZ002

Parameter:

The steps to install a car air conditioning compressor are as follows:

1. Prepare the vehicle by securely parking it on a level surface and engaging the parking brake.

2. Safely lift the front of the vehicle using a hydraulic jack and securely support it with jack stands.

3. Use a refrigerant recovery machine to evacuate the system and remove any remaining refrigerant.

4. Disconnect the negative terminal of the vehicle's battery to prevent electrical accidents.

5. Remove the drive belt by releasing tension from the belt tensioner and carefully sliding the belt off the compressor pulley.

6. Unplug the electrical connector from the compressor and disconnect any other ancillary connections.

7. Carefully remove any mounting brackets or bolts securing the compressor to the engine/block.

8. Extract the old compressor from its location, taking care not to damage any surrounding components.

9. Before installing the new compressor, apply a thin layer of refrigerant oil to the o-rings or sealing surfaces of the compressor fittings.

10. Align the new compressor correctly and insert it into position, taking care to avoid excessive force or misalignment.

11. Reinstall the mounting brackets or bolts and tighten them to the manufacturer's recommended torque specification.

12. Reconnect the electrical connector and any other ancillary connections previously disconnected.

13. Install the drive belt onto the compressor pulley, ensuring it is properly aligned and under appropriate tension.

14. Reconnect the negative terminal of the vehicle's battery and ensure it is securely attached.

15. Lower the vehicle from the jack stands and remove the hydraulic jack.

16. Perform an evacuation and recharge of the system, following the manufacturer's guidelines and using the appropriate amount of refrigerant.

17. Finally, test the system to ensure the compressor is functioning properly and there are no refrigerant leaks.

Please note that it is important to consult the vehicle's service manual or seek professional assistance to ensure proper installation of a car air conditioning compressor.

AC Compressor is cool,not cold

Car air conditioner compressors are indeed cool, but not to be mistaken for being cold. These vital components play a crucial role in the efficient functioning of car air conditioning systems.

Car air conditioning systems are designed to regulate the temperature and humidity inside the vehicle cabin, providing a comfortable driving experience regardless of the weather conditions outside. The compressor is a key part of this system, responsible for pressurizing and circulating the refrigerant throughout the system.

When the air conditioning is turned on, the compressor is engaged to compress the refrigerant gas, which is typically a blend of chemicals such as R134a or R1234yf. As the refrigerant is compressed, its temperature increases significantly due to the compression process. Although the compressor becomes warm during this process, it does not emit cold air directly.

The compressed refrigerant then travels to the condenser, which acts as a heat exchanger. Here, the hot compressed gas dissipates its heat to the external environment. As a result, the refrigerant transitions from a gas to a high-pressure liquid form. It is then directed to the receiver drier or accumulator, which removes any moisture or impurities present in the refrigerant.

From the receiver drier or accumulator, the refrigerant flows to the expansion valve or orifice tube. These devices help reduce the pressure of the refrigerant, causing it to expand rapidly, which in turn decreases its temperature. The refrigerant now enters the evaporator, situated in the car's dashboard or inside the air conditioning unit.

The evaporator is where the magic happens. As the low-pressure liquid refrigerant passes through the evaporator, it absorbs heat from the surrounding air. This heat transfer process cools down the air, which is then blown into the vehicle cabin through the vents, providing a refreshing and comfortable atmosphere. As the refrigerant absorbs heat, it evaporates back into a low-pressure gas state.

Finally, the low-pressure gas refrigerant returns to the compressor, where the cycle starts again. The compressor's role is crucial in maintaining the pressure and flow of refrigerant throughout the system, ensuring consistent cooling performance.

Although the compressor is an essential part of the air conditioning system, it does not directly release cold air. Instead, it compresses the refrigerant gas, raising its temperature, which is then cooled down through the subsequent processes within the system. The cooled air is ultimately released into the car cabin, providing relief from the heat.

In conclusion, while car air conditioner compressors are indeed cool, they do not emit cold air directly. Their main function is to compress the refrigerant gas, keeping the air conditioning system operating effectively. The compressor's contribution to the circulation and conditioning of air within the vehicle cabin is vital, resulting in a comfortable and enjoyable driving experience.

 Goods Pictures

Delivery/ Warehouse