RC.600.019 Auto Air Conditioner Compressor For HARRISON S10 12 VOLTS POLIA 6PK WXCV008

RC.600.019 Auto Air Conditioner Compressor For HARRISON S10 12 VOLTS POLIA 6PK WXCV008 

Parameter :

Product Pictures

Here’s a professional English guide on Automotive Air Conditioning Compressor Installation

1. Pre-Installation Checks

✔ Verify Compatibility – Ensure the compressor matches the vehicle’s make, model, and refrigerant type (e.g., R134a or R1234yf).

✔ Inspect Components – Check for shipping damage, leaks, or missing parts (e.g., clutch, pulley, seals).

✔ Clean the System – Flush refrigerant lines and replace the receiver/drier or accumulator to prevent contamination.

2. Handling & Lubrication

✔ Oil Balance – Drain and measure old compressor oil; add the correct type and quantity of new oil (PAG, ester, or mineral oil as specified).

✔ Avoid Dry Running – Never operate the compressor without refrigerant/oil to prevent seizure.

3. Installation Steps

✔ Secure Mounting – Tighten bolts to the manufacturer’s torque specifications to avoid misalignment or vibration damage.

✔ Seal Connections – Use new O-rings lubricated with A/C oil and ensure fittings are leak-free.

✔ Electrical Checks – Test the clutch coil and wiring for proper voltage/grounding before startup.

4. Post-Installation

✔ Vacuum the System – Evacuate air/moisture for at least 30+ minutes to avoid inefficiency or corrosion.

✔ Refrigerant Charge – Recharge with the exact refrigerant amount specified (under/overcharging harms performance).

✔ Leak Test – Use a UV dye or electronic detector to confirm no leaks before finalizing.

5. Common Mistakes to Avoid

❌ Reusing old O-rings or seals (causes leaks).

❌ Skipping the receiver/drier replacement (contaminates the system).

❌ Ignoring pulley/clutch alignment (leads to premature wear).

Optional Add-ons:

• Include a torque specification table for your models.

• Add a QR code linking to an installation video.

• Highlight warranty terms (e.g., "Improper installation voids warranty").