EG2161450 Car Ac Air Conditioner Compressor For Mazda CX7 2.3 WXMZ021

EG2161450 Car Ac Air Conditioner Compressor For Mazda CX7 2.3 WXMZ019

The automobile air conditioning compressor is the core component of the automobile air conditioning system. It achieves rapid cooling of the air in the car by compressing low-pressure cold gas into high-pressure and high-temperature gas. Our compressors have the advantages of efficient refrigeration capacity, low energy consumption, low noise and reliability, providing drivers with a comfortable driving experience. We are committed to providing customers with high-quality, high-performance automotive air conditioning compressors and contributing to the comfortable driving experience in the automotive industry.
 
 
Parameter:
 
 

 
 
 
 
 
 
Installation:
 
1. Preparation: Before starting the installation, make sure you have all the necessary tools and equipment. This includes a wrench, torque wrench, refrigerant recovery machine, vacuum pump, manifold gauge set, and a new compressor.
 
2. Safety measures: Ensure that the vehicle's engine is turned off and the battery is disconnected to prevent any accidents. Take necessary precautions to avoid contact with the refrigerant.
 
3. Remove the old compressor: Begin by removing the old compressor. This involves disconnecting the refrigerant lines, electrical connections, and mounting bolts. Be sure to properly label and seal the disconnected refrigerant lines to avoid refrigerant leakage.
 
4. Install the new compressor: Place the new compressor in the correct position, aligning it with the mounting holes. Use a torque wrench to tighten the mounting bolts according to the manufacturer's specifications.
 
5. Connect refrigerant lines: Connect the refrigerant lines to the new compressor. Ensure that the connections are tight and leak-free. Use a torque wrench to tighten the fittings to the recommended torque specifications.
 
6. Electrical connections: Reconnect the electrical connections to the compressor. Double-check the connections to make sure they are secure.
 
 
 
 
Testing:
 
1. Vacuum testing: Connect the vacuum pump to the low-pressure side of the refrigerant system using a manifold gauge set. Evacuate the system by running the vacuum pump for the recommended amount of time specified by the manufacturer. Monitor the gauge readings to ensure that the system holds a vacuum.
 
2. Leak testing: Once the vacuum is achieved, close the valves on the manifold gauge set and turn off the vacuum pump. Allow the system to sit for a period of time and monitor the gauge readings. If the gauge readings remain stable, it indicates that the system is leak-free. Any significant drop in gauge readings would suggest a refrigerant leak and require further investigation.
 
3. Operational testing: With the vacuum still intact, proceed to recharge the system with the appropriate amount of refrigerant. Start the engine and turn on the air conditioning. Monitor the compressor operation, including the clutch engagement and refrigerant pressure on the gauge set. Ensure that the compressor operates smoothly and provides the desired cooling effect.
 
4. Performance testing: Measure the air temperature at the vents using a thermometer. It should be significantly lower than the ambient temperature. If the cooling effect is not satisfactory, it may indicate an issue with the compressor or other components that require further diagnosis.
 
In conclusion, the proper installation and regular testing of car air conditioning compressors are crucial for maintaining optimal performance. By following the steps outlined above, you can ensure a successful installation and reliable operation of the compressor.

Goods Picture

FAQ:

1. who are we?
We are based in Guangdong, China, start from 2007,sell to South America(20.00%),Mid East(18.00%),Eastern Europe(15.00%),Domestic Market(13.00%),Southeast Asia(10.00%),North America(5.00%),Western Europe(5.00%),Eastern Asia(5.00%),Central America(5.00%),Africa(2.00%),South Asia(1.00%),Oceania(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Variable Displacement AC Compressor/Piston AC Compressor/Scroll AC Compressor/Rotary Vane AC Compressor/Automotive Air Conditioning Clutch

4. why should you buy from us not from other suppliers?
Guangzhou WeiXing automobile air conditioning parts Co., Ltd is focused on providing high-quality automotive air-conditioning compressors, including car series, truck series, heavy duty truck series and bus series. Our product line is very rich, with more

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese