Car AC Compressor 97701F2500 For Hyundai Elantra For Cerato/Verna For Kia Soul For Forte For ProCeed WXHY035

Car AC Compressor 97701F2500 For Hyundai Elantra For Cerato/Verna For Kia Soul For Forte For ProCeed WXHY035

 
Parameter :

Compressors :

1) Rotary Vane - Panasonic

Rotary vane compressors consist of a rotor with three or four vanes and a carefully shaped rotor housing. As the compressor shaft rotates, the vanes and housing form chambers.

The R134a is drawn through the suction port into these chambers, which become smaller as the rotor turns. The discharge port is located at the point where the gas is fully compressed.

The vanes are sealed against the rotor housing by centrifugal force and lubricating oil. The oil sump and oil pump are located on the discharge side, so that the high pressure forces oil

through the oil pump and then onto the base of the vanes keeping them sealed against the rotor housing.

During idle an occasional vane noise from the compressor may be heard. This is due to the time taken for lubricating oil to circulate through the A/C system.

2)Scroll type - Sanden

This compressor uses a unique design with two scrolls, one fixed and one is movable, both are inter-leaved.

The movable spiral is able to ORBIT or oscillate without actually fully rotating. The movable scroll is connected

to the input shaft via a concentric bearing.

As the movable spiral oscillates within the fixed spiral, a number of pockets are formed between the spiral. As

these pockets decrease in size the refrigerant is squeezed, the pressure increases and is discharged

through a reed valve at the discharge port in the rear section of the compressor.

3)Variable stroke - Harrison V5

The Delphi (Harrison) V5 compressor is a non-cycling variable displacement compressor.

The compressor varies displacement to control capacity to meet A/C system demand at all operating conditions. The compressor features a variable angle wobble plate in five (V5) cylinder axial piston design.

Displacement is controlled by a bellows actuated control valve located in the rear cylinder head. This control valve senses and responds to the system suction pressure or A/C system demand.

Through regulation of compressor crankcase pressure, the wobble plate angle, and therefore compressor displacement is variable.

In general, the compressor discharge pressure is much greater than the compressor crankcase. Which is greater than or equal to the compressor suction pressure.

At maximum displacement, compressor crankcase pressure is equal to the compressor suction pressure.

At reduced or minimum displacement, the compressor crankcase pressure is greater than the suction pressure.

FAQ:

1. who are we?
We are based in Guangdong, China, start from 2007,sell to South America(20.00%),Mid East(18.00%),Eastern Europe(15.00%),Domestic Market(13.00%),Southeast Asia(10.00%),North America(5.00%),Western Europe(5.00%),Eastern Asia(5.00%),Central America(5.00%),Africa(2.00%),South Asia(1.00%),Oceania(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Variable Displacement AC Compressor/Piston AC Compressor/Scroll AC Compressor/Rotary Vane AC Compressor/Automotive Air Conditioning Clutch

4. why should you buy from us not from other suppliers?
Guangzhou WeiXing automobile air conditioning parts Co., Ltd is focused on providing high-quality automotive air-conditioning compressors, including car series, truck series, heavy duty truck series and bus series. Our product line is very rich, with more

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese